High-quality Materials: This idle speed control is made of high-quality engineering materials, with a smooth overall appearance and no other defects on the surface. It has good performance, low probability of air leakage and can withstand inspection. The interior of the interface is made of 4-pin copper core material to avoid poor contact.
Function: This idle speed control valve can automatically adjust the engine idle speed. It increases or decreases the idle air intake by changing the size of the ventilation duct next to the throttle to achieve the purpose of adjusting the idle speed. Restore idle speed, reduce engine fuel consumption, increase power, and solve stalling problems.
What Situations Need to Be Replaced: The engine stalls suddenly during startup, is difficult to ignite when starting hot and cold, is unstable at idle, shakes when starting, the motor has not been replaced after long-term use, etc. This idle motor control valve can perfectly solve these problems for you, making the car drive more stable.
Product Details: You will receive 1 x idle speed control valve. Compatible with King Kong Auto. The idle speed motor parameters are the same as the original car and have a longer service life. The shaft in front of the idle motor can be freely extended and retracted, so the length you can see has no effect, and it will be extended when the vehicle is powered on. This does not affect the work of the idle motor, so don’t worry.
Easy to Use: 1. Disconnect the power cord and wait 10 minutes. 2. Pay attention to whether the O-ring matches and ensures sealing. 3. Turn the key from OFF to ON, wait for 20 seconds, then turn it to the OFF position again, cycle three times and then ignite again. Press the accelerator lightly to 3000-4000 rpm and then release the accelerator. Maintain the standard idle speed for 10 seconds, pull out the key, and tighten the screws after the idle speed is stable.
